How to use the electric accompanied by the tropical band? What are the precautions?

Winter temperature is relatively low, we often hear the need to pipe insulation, and one of the electric accompanied by tropical heat preservation is a kind of heat preservation, it is mainly used for pipeline, tank, instrumentation and other equipment, frost insulation and temperature maintenance, because it does not achieve the effect of heating, so it is called accompanied by heat. Accompanied by the heat, electric heat is also a kind of name of electric accompanied by tropical

As many users for electric accompanied by tropical insulation is not very familiar with, so do not know how to use, is not clear which precautions, here to introduce to you. Electricity accompanies the tropical use only need to energize open on the line, but the use of the process still need some attention.

1. Electric accompanied by tropical in the storage, handling, installation and use is not allowed to twist, not repeated bending, is strictly prohibited to damage the outer sheath, damage to the insulation layer.

2. Electric accompanied by the installation of tropical encountered sharp edges, sharp corners should be polished smooth or pad on the aluminum tape, in order to prevent damage to the outer insulation layer.

3. The electric accompanying tropical installation should be close to the pipeline, as far as possible using aluminum tape paste, the way at the oil and moisture, should be dealt with cleanly, with heat-resistant tape will be fixed along the radial direction of the electric tropical tape.

4. In addition to the self-control temperature electric accompanying tropical other specifications of electric accompanying tropical installation is not allowed to cross, overlap.

5. When wiring, the electric accompanies the tropical and the accessory to connect correctly and reliably, prevent short-circuit, at the same time will be connected to the grounding of the braided network.

6. The installation of electric accompanied by the heat tape must be in the medium pipeline system all installation end, and by the water pressure or airtight test after qualified. The construction of the insulation layer must be carried out after all installation and commissioning of the electric heating tape is finished and the power supply is normal.